User Login Registration Password recovery
Email Username

STAR-P

 

   

Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
Pressure transducers INSIDE
Coupling: 1/8" GAS Female
RELATVE pressures from 100 mbar to 5 bar
ABSOLUTE pressures from 500 mbar to 5 bar (barometric pressure)
DIFFERENTIAL pressures from 100 mbar to 5 bar
OPERATES UNTIL 7 EXTERNAL SENSORS with ABSOLUTE pressures from 5 bar to 2000 bar
Programmable DATA LOGGER

Accuracy: 0,10% and 0,05%

Applications in GAS and AIR (NO liquids)

USB output 

REQUEST A FREE QUOTATION

STAR

 



   

Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.

AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)

LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the  visualization of 180°.

DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression)

DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

REQUEST A FREE QUOTATION


WISTAR

 

   

Professional ergonomic receiver to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, extremely versatile and easy to be used.
Through an integrated wireless communication system it is possible to directly interface with 1, 2, 3 or 4 WIMOD modules at the same time in the real time. The transmission frequency at 433 MHz makes the communication safe and reliable even in presence of other transmission systems such as mobile phones, walkie-talkie, radio-microphones, remote-controls etc. which usually work on other frequencies by ensuring a covering of approx. 100 meters in free space. 
WiSTAR is equipped with USB interface for communicating in real time with a PC for recharging the long lasting and highly reliable internal battery (Li-Ion). In addition to the direct reading of the measurements it is possible to detect PEAKS and to block the measurement on the display thanks to HOLD function. 

LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.

DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

REQUEST A FREE QUOTATION


MP4Plus

 

   

"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP4Plus is born.
MP4Plus is a Professional Digital Indicator with 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP4Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.

REQUEST A FREE QUOTATION


TDA

 

   

The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated.
Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures.

Outputi:
RS232C - RS485 ModBusCanOpenDeviceNetProfiBus

REQUEST A FREE QUOTATION

MP10Plus

 

   

Laboratory digital indicator is a programmable instrument for the treatment of signals from strain gauge full bridge transducers, that allows the measurement of forces, mass, pressure, torque moments and displacements.

It has been designed to be used in the most modern systems of static and dynamic measurement of high precision, such as metrology laboratories, materials testing machines, test benches or test etc. ...
It is ideal to be used as first-line standard, if periodically certified by calibration laboratories or equivalent centers (ACCREDIA in Italy).

MP10 has an accuracy of 0.0010% or 0.0020%, 24-bit internal resolution and combines a resolution (with signal ± 2 mV/V) of    ± 2.000.000 divisions in the K2 version (± 200.000 divisions in the standard version).
DATA LOGGER inside

HIGH ACCURACY

REQUEST A FREE QUOTATION


MP6Plus

 

   

"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP6Plus is born.
MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.

REQUEST A FREE QUOTATION


WIMP2Plus

 

   

WIRELESS Professional Panel Mounting indicator able to handle simultaneous from 1 to 4 transmission devices WIMOD, WISTAR and WIJET.
The transmitters can be equipped with different types of sensors to measure quantities such WEIGHT, FORCE, PRESSURE, TORQUE and DISPLACEMENT.
Particularly suitable for applications in industrial or laboratory where it is necessary to make measurements with multiple sensors at a maximum distance of 100m in free space.
The system makes very simple and fast to change the setup of the entire measuring system without having to change the wiring between the sensor and the instrument.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
For each channel, it is possible to customize the frequency of reading which can be set from 1 sample per second up to 10 sample per second and then being able to meet the needs of applications that require a higher speed of response.

REQUEST A FREE QUOTATION

STAR-F

 



   

Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible tointegrate inside a FORCE from 10 N to 5 kN or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.

AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)

LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the  visualization of 180°.

DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression)

DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

REQUEST A FREE QUOTATION


DFW2



   

NEW PERFORMANCES
Digital dynamometer with internal batteries realised to control and testin the COMPRESSION force of:
hydraulic electrodes welders
pneumatic presses
test benches
torquing vices
Nominal Losd from 10 kN to 40 kN
Linearity 0.50%
Low-profile strain gauge sensor (18mm) entirely executed in stainless steel, is suitable for high-precision measurements in compression and guarantees a long-term stability even when dynamic applications are involved.
In the sensor supporting surface an insulating area has been introduced in order to make hydraulic welders easier to be checked.

REQUEST A FREE QUOTATION

DTR2

 





 

NEW PERFORMANCES
Hand held digital indicator, totally autonomous and with input for strain gauge based torque transducers.
It is ideal to be used in the most modern static and dynamic measurement systems.
With 0,02% accuracy makes it possible to be used use in quality systems as first or second line sample, periodically calibrated by a calibration centre (ACCREDIA in italy).

REQUEST A FREE QUOTATION


JET

 

   

Digital pressure gauges for RELATIVE, ABSOLUTE and VACCUM measures
Nominal pressures from 100 mbar to 2000 bar
Linearity and hysteresis 0,20%
Measurement of the temperature of the fluid
High mechanical strength
Suitable for dynamic and static applications
Funzioni: ZERO, FILTRO, PICCO, AUTO SPEGNIMENTO

Programmable DATA LOGGER
Record PRESSURE and TEMPERATURE

USB Outpur                                     WIRELESS version on request

            

REQUEST A FREE QUOTATION

MP2Plus

 

   

NEW PERFORMANCES

"THE EVOLUTION OF THE SPECIES" : after more than 30 years of service in the various versions the new MP2Plus is born.
MP2Plus is a Professional Digital Indicator with 1 (standard)or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output, PT100, potentiometer, ENCODER and LVDT.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of WEIGHT, FORCE, PRESSURE, TORQUE, DISPLACEMENTS, ANGLE, SPEED and TEMPERATURE.
To FIT EVERY APPLICATION the instrument can be configured and customized:  the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.

Each input channels can be supplied in 7 different configurations:

  • ±2mV/V, ±3mV/V
  • 4-20mA, 0-20mA
  • ±10V, ±5V
  • PT100
  • ENCODER
  • POTENTIOMETER
  • LVDT

On request FIELDBUS communication selectable among : DeviceNet, CANopen, EtherNet/IP, PROFIBUS, PROFINET to be connected inside a standard PLC network.

NEW COUNTING function. 

REQUEST A FREE QUOTATION


GR5B

   

NEW PERFORMANCES
High Accuracy 0.05%
WEIGHT Measures for LIFTING equipment
For TENSION applications
Nominal loads from 500 kg to 9,5 tons

WIRELESS version on request

REQUEST A FREE QUOTATION

CLFlex


   

The transducer consists of a STRAIN CYLINDER and a FORCE transducer used for the calibration and auto alignment of the joints as well as for the force centering of compression test machines on hardened concrete.

Executed according to the norm references: UNI EN 12390-4 and DIN 51302-2.

Nominal Load 3 MN
Class (ISO 376) 1
Linearity and Hysteresis 0,05%
Output: 2mV/V

REQUEST A FREE QUOTATION

CLB

   

Force transducers for the measurement of static and dynamic loads in COMPRESSION and TENSION
Nominal Load from 30 kN to 600 kN
Class (ISO 376) 00, 0.5 and 1
Linearity and Hysteresis 0,03%
Output: 2mV/V

REQUEST A FREE QUOTATION

EasyTORK

     

ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
HEXAGONAL coupling whit quick action chuck 
Nominal torque 5 N•m, 10 N•m and 25 N•m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
Versions with integrated reading ANGLE and SPEED
Digital Output

 

RT2-USB

     

ROTATING torque transducers for the measurement in clockwise and anticlockwise direction
CYLINDRICAL or SQUARE coupling 
Nominal torque from 0.5 N•m to 5000 N•m
Linearity and Hysteresis 0,20%
Nominal speed of rotation 4000 rpm
Contact transmission
Versions with integrated reading ANGLE and SPEED
Digital Output

REQUEST A FREE QUOTATION

BTR2

     

NEW PERFORMANCES
DESKTOP DIGITAL TORQUE forthe measurement in clockwise and anticlockwise direction
For calibrate of torque keys and torque screwdrivers
SQUARE drive process coupling (UNI ISO 1174-1)
Nominal torque from 0,5 N•m to 2000 N•m
Linearity and Hysteresis 0,20%
Complete with USB output

LOW PRICE and EASY APPLICATIONS

REQUEST A FREE QUOTATION

Leave a
message