User Login Registration Password recovery
Email Username

Instruments


Design and production of electronic instrumentation for measurements of weight, strength, force, torque and displacement.
Realized for industrial applications, weighing systems, calibration laboratories, testing laboratories, research laboratories etc ...


WIMOD

 

   

Professional WIRELESS transmitter to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, to be applied directly on the body of the sensor or in version stand alone.

Through a wireless communication integrated can interface directly in real time to:
PC  -  TABLET  -  WISTAR  -  WIMP2plus  -  PLC

Extremely versatile and simple to use.

Transmits up to 200m in free area.

REQUEST A FREE QUOTATION


WISTAR

 

   

Professional ergonomic receiver to measure FORCE, WEIGHT, PRESSURE, TORQUE and DISPLACEMENT, extremely versatile and easy to be used.
Through an integrated wireless communication system it is possible to directly interface with 1, 2, 3 or 4 WIMOD modules at the same time in the real time. The transmission frequency at 433 MHz makes the communication safe and reliable even in presence of other transmission systems such as mobile phones, walkie-talkie, radio-microphones, remote-controls etc. which usually work on other frequencies by ensuring a covering of approx. 100 meters in free space. 
WiSTAR is equipped with USB interface for communicating in real time with a PC for recharging the long lasting and highly reliable internal battery (Li-Ion). In addition to the direct reading of the measurements it is possible to detect PEAKS and to block the measurement on the display thanks to HOLD function. 

LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the visualization of 180°.

DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

REQUEST A FREE QUOTATION


DynamicSTAR

 



   



Professional ergonomic handheld indicator extremely versatile and simple to use for measures of FORCE, WEIGHT, PRESSURE, TORQUE, ANGLE, SPEED and POWER.

Particularly indicated for both applications, STATIC where he works with a high resolution (± 200.000 divisions at 2mV / V) and DYNAMIC applications thanks to a programmable acquisition rate up to 19.2 kHz.

Internal data logger that allows to internally record the evidence, even at the maximum acquisition speed and then transfer them to a PC with WinStar software to print analysis, archiving, etc. ...

The main input (CH1) with automatic recognition of 7 external sensors.

Versions with second input (CH2) for ENCODER suitable for measuring ANGLE, SPEED and POWER.

 

REQUEST A FREE QUOTATION


STAR

 



   

Professional ergonomic indicator extremely versatile and easy to be used for measurement of FORCE, WEIGHT, PRESSURE (gas), VACUUM, TORQUE and DISPLACEMENT.
It is possible to integrate inside a force sensor (up to max. 5kN) or a pressure sensor (relative, absolute or differential up to max. 5bar) while from the external input it is possible to connect strain gauges sensors with output in mV/V such as: load cells, force transducers, pressure transducers, torque and displacement transducers.

AUTOMATIC recognition of FORCE, WEIGHT, VACUUM, PRESSURE, TORQUE and DISPLACEMENT external transducers (max. 7)

LCD graph DISPLAY with 3 levels of backlighting to adapt itself to any conditions of external brightness and with the possibility of rotating the  visualization of 180°.

DIGITAL CALIBRATIONS protected by Password with full scale programming or with the “LINEARIZATION by points” of transducers, for every transducer it is possible to separately calibrate both the positive and the negative field. (Example: Tension and Compression)

DATALOGGER allows to memorize measurements and to keep them in the internal memory even in case of instrument switching off. (max. 130.000 recordings)

REQUEST A FREE QUOTATION


MP1

 
   

Panel digital indicator designed to be used in the modern static and dynamic measure systems in industrial activity, it can sample the signal up to a frequency of 300Hz.
Suitable for processing analogue signals coming from strain gauge based load cells and from pressure transmitters with amplified output, it enables to perform measurements with a long-term accuracy of 0.05% of full scale, with a resolution of ±9.999 divisions 2mV/V.
Accuracy 0.05%

LOW COST

REQUEST A FREE QUOTATION

MP2E

 
   

Panel digital indicator designed to be used in the modern static and dynamic measure systems of industrial field of activity.
Suitable for processing analog signals coming from strain gauge load cells and torque transducers or by pressure and torque transmitters, it allows to perform measurements with a long-term accuracy of 0.01%with a resolution of ±50.000 divisions at 2mV/V. At your inside the instrument works with ±500.000 divisions. All the calibrations (Zero, Full Scale, Analog output, Sensibility, etc.) are digital (no trimmer), therefore they can be performed and repeated without the need of removing the instrument from the panel and without to open it.
Accuracy 0.01%

REQUEST A FREE QUOTATION

MP2Plus

 

   

NEW PERFORMANCES

"THE EVOLUTION OF THE SPECIES" : after more than 30 years of service in the various versions the new MP2Plus is born.
MP2Plus is a Professional Digital Indicator with 1 (standard)or 2 (option) inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output, PT100, potentiometer, ENCODER and LVDT.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of WEIGHT, FORCE, PRESSURE, TORQUE, DISPLACEMENTS, ANGLE, SPEED and TEMPERATURE.
To FIT EVERY APPLICATION the instrument can be configured and customized:  the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.

Each input channels can be supplied in 7 different configurations:

  • ±2mV/V, ±3mV/V
  • 4-20mA, 0-20mA
  • ±10V, ±5V
  • PT100
  • ENCODER
  • POTENTIOMETER
  • LVDT

On request FIELDBUS communication selectable among : DeviceNet, CANopen, EtherNet/IP, PROFIBUS, PROFINET to be connected inside a standard PLC network.

NEW COUNTING function 

REQUEST A FREE QUOTATION


WIMP2Plus

 

   

WIRELESS Professional Panel Mounting indicator able to handle simultaneous from 1 to 4 transmission devices WIMOD, WISTAR and WIJET.
The transmitters can be equipped with different types of sensors to measure quantities such WEIGHT, FORCE, PRESSURE, TORQUE and DISPLACEMENT.
Particularly suitable for applications in industrial or laboratory where it is necessary to make measurements with multiple sensors at a maximum distance of 100m in free space.
The system makes very simple and fast to change the setup of the entire measuring system without having to change the wiring between the sensor and the instrument.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
For each channel, it is possible to customize the frequency of reading which can be set from 1 sample per second up to 10 sample per second and then being able to meet the needs of applications that require a higher speed of response.

REQUEST A FREE QUOTATION

MP4Plus

 

   

"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP4Plus is born.
MP4Plus is a Professional Digital Indicator with 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100.
Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP4Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.

REQUEST A FREE QUOTATION


MP10Plus

 

   

Laboratory digital indicator is a programmable instrument for the treatment of signals from strain gauge full bridge transducers, that allows the measurement of forces, mass, pressure, torque moments and displacements.

It has been designed to be used in the most modern systems of static and dynamic measurement of high precision, such as metrology laboratories, materials testing machines, test benches or test etc. ...
It is ideal to be used as first-line standard, if periodically certified by calibration laboratories or equivalent centers (ACCREDIA in Italy).

MP10 has an accuracy of 0.0010% or 0.0020%, 24-bit internal resolution and combines a resolution (with signal ± 2 mV/V) of    ± 2.000.000 divisions in the K2 version (± 200.000 divisions in the standard version).
DATA LOGGER inside

HIGH ACCURACY

REQUEST A FREE QUOTATION


MP6Plus

 

   

"THE EVOLUTION OF THE SPECIES" : after more than 20 years of service in the various versions the new MP6Plus is born.
MP6Plus is a Professional Digital Laboratory Indicator with 1, 2, 3, or 4 inputs, suitable for receiving signals from strain gauge sensors, transmitters with voltage or current output and PT100. Particularly suitable for both static and dynamic applications, for calibration and verification in metrology laboratories or industrial environments where it is necessary to make measurements of weight, force, pressure, torque, displacement and temperature in a synchronized manner.
To FIT EVERY APPLICATION the instrument can be configured and customized: the function keys F1, F2, F3 and F4 can be programmed for the function of interest such as: PEAK, HOLD, RELEASE, TX DATA DATALOG, DISCHARGE, ZOOM.
MP6Plus allows you to enable and disable each channel and using the ZOOM function it s possible to display only the channel of interest in full screen.
The instrument works with a resolution of ±100.000 divisions and an accuracy better than 0.005% due to an internal 24-bit Sigma-Delta AD converter and a measurement control that is carried out for switching at a frequency equal to that of sampling: this system provides a better suppression of interference due to offset drift and to the connecting cables.

REQUEST A FREE QUOTATION


PC2M

 
   

Signal calibrator has been realised to perform periodical checks and calibrations on indicators with a 2mV/V input and a 4 or 6 wires systems.
Provided with a main switch with 6 selectable steps, it allows to control the linearity on both positive and negative field.
Internally, the 350Ω full bridge unbalancing, is generated by high stability passive resistances (1 ppm/°C) that enable the calibrator to work with a stable accuracy better than 0.0025% of full scale and with repeatability of 5 ppm.
In order to work with more ease, a system that keeps the ZERO signal constant by working on both positive and negative field without performing different zero settings on the indicator has been introduced.

Complete with calibration report.

REQUEST A FREE QUOTATION

DFI

 
 

Hand held digital indicator, totally autonomous and with input for strain gauge based dynamometers (force) and load cells (weight).
It is ideal to be used in the most modern static and dynamic measurement systems as materials testing-machines, printing presses, test benches and generally in the automation industrial sector.
With 0,02% accuracy makes it possible to be used use in quality systems as first or second line sample, periodically calibrated by a calibration centre (ACCREDIA in italy).

REQUEST A FREE QUOTATION


DFX

 
 

Hand held digital indicator, totally autonomous and with input for strain gauge based dynamometers (force) and load cells (weight).
It is ideal to be used in the most modern static and dynamic measurement systems as materials testing-machines, printing presses, test benches and generally in the automation industrial sector.

Accuracy ±0,04%

LOW COST

REQUEST A FREE QUOTATION

TA4/2

 
   

Transmitters make easy and cheap the remote transmission of strain gauge load cells analogue signals to PLC, PC, recorders, remote indicators etc… until to a distance of 40 miters.
The possibility of internally connecting the load cells in parallel (max. 4 of 350Ω or 8 of 700Ω) makes system wiring easier by avoiding the use of junction boxes. It is ideal to be used in the most advanced industrial weighing systems, processes control, dosing (silos and hoppers) and automation thanks to the two versions of its case: hermetic case made of pressure die-cast aluminium (IP65 class) or plastic case for mounting on a DIN guide (suitable for applications inside control panels)

REQUEST A FREE QUOTATION


TA5F

 
   

The transmitter makes simple and cheap the remote transmission of the value sampled from strain gauges load cells, torque transducers, etc.. to PLC, PC, recorders, etc…
The possibility of internally performing the parallel of the load cells simplifies the system wiring because it does not require the use of any junction box. TA5F is available in two versions: with an hermetic case made of die-cast aluminium (IP65 protection class) or in a plastic case for the mounting on a DIN bar (suitable for control panels).
The transmitter has a maxim resolution of ±200.000 divisions, it is ideal for directly connecting the point/site of the measurement to a remote control station, the high conversion speed (up to 300Hz) makes it suitable also for application in real-time.
The transmitter is internally controlled by a microcontroller in Flash technology which first processes the data coming from the ratiometric AD converter and then manages the serial communication.
The transmitter can work as Slave (it transmits the value only on request) or as Master (it transmits the value continuously).

Outputi: RS232C and RS485 Modbus 

REQUEST A FREE QUOTATION

TDA

 

   

The digital transmitter TDA is an instrument designed for the processing of signals from strain gauges in full bridge configuration with 4 or 6 wires and is able to interface with most of the main common field buses such as Modbus RTU, CANopen, DeviceNet and Profibus. For the fieldbus CANopen, Devicenet and Profibus the electronic is galvanically isolated.
Besides the selected fieldbus, it has a RS232 serial interface with a communication program already SUPPLIED (WinTDA), allows a fast tool to control the effectiveness of the performance of the transmitter and allows to implement the calibration procedures.

Outputi:
RS232C - RS485 ModBusCanOpenDeviceNetProfiBus

REQUEST A FREE QUOTATION

TAUSB

 
   

The transmitter makes simple and economical the transmission of data coming from a transducer to a PC.
TAUSB has a maximum resolution of 20.000 divisions and transmits the data directly on-line USB 2.0.
It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal for use in a laboratory as a generic acquisition system leaving to the software on PCs the characterization of the parameters to which the transducer is connected.
The transmitter is controlled by a microcontroller that processes the data sampled by a high resolution AD converter at a frequency up to 3000Hz and manages the USB communication.
The transmitter continuously transmits the value in divisions according to a protocol highly optimized and easy to implement.
Accuracy: 0,025% 
LOW COST

REQUEST A FREE QUOTATION

TA2USB

 


   

The transmitter makes simple and economical the transmission of data coming from up to 2 load cells, transducers or potentiometers to a PC.
TA2USB has a maximum resolution of ±50.000 divisions and transmits the data directly on-line USB 2.0.
It is a very simple but complete instrument as it is self powered directly from the USB line and is ideal as acquisition system connected to a PC.
The transmitter is controlled by a microcontroller that processes the data sampled by two 24bit ADC converters (one for each channels) at a frequency from 5 to 4800Hz.
The instrument continuously transmits the value in divisions according to a protocol highly optimized and easy to implement and allows to get in real-time all the internal acquisition data.

Accuracy 0,010% 

REQUEST A FREE QUOTATION

SG4

 
 
   

Junction box is used to make weighing, dosing and plants controlling easier, whenever connecting load cells in parallel is necessary, in order to have a single output signal which represents the sum of the signals of connected load cells.

Also available ATEX version

REQUEST A FREE QUOTATION

Leave a
message